View ENN7385_745913.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN7385
CPH6517
NPN Epitaxial Planar Silicon Composite Transistor
CPH6517
Low-Frequency General-Purpose Amplifier Applications
Features
*
Package Dimensions
unit : mm 2212
[CPH6517]
6 5 4
0.6 0.2
*
* *
Electrical Connection
C1 B2 E2
1
2
0.2
3 0.95
0.6
1.6
2.8
Composite type with 2 transistors contained in the CPH package currently in use, improving the mounting efficiency greatly. The CPH6517 is formed with two chips, being equivalent to the 2SC4555, placed in one package. Low collector to emitter saturation voltage. Excellent in thermal equilibrium and pair capability.
2.9
0.15
0.05
TR1
0.4
(Top view)
B1
E1
C2
0.7 0.9
TR2
1 : Base 1 2 : Emitter 1 3 : Collector 2 4 : Emitter 2 5 : Base 2 6 : Collector 1 SANYO : CPH6
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current(Pulse) Base Current Collector Dissipation Total Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC PT Tj Tstg 1unit Conditions
Ratings 20 15 5 500 1 100 350 500 150 --55 to +150
Unit V V V mA A mA mW mW C C
Electrical Characteristics at Ta=25C
Parameter Collector Cutoff Current Emitter Cutoff Current Symbol ICBO IEBO VCB=15V, IE=0 VEB=4V, IC=0 Conditions Ratings min typ max 0.1 0.1 Unit A A
Note : The specifications shown above are for each individual transistor.
Continued on next page.
Marking : 3B
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22503 TS IM TA-100272 No.7385-1/3
CPH6517
Continued from preceding page.
Parameter DC Current Gain DC Current Gain Ratio Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol hFE1 hFE2 hFE(Small / Large) fT Cob VCE(sat)1 VCE(sat)2 VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO Conditions VCE=2V, IC=10mA VCE=2V, IC=400mA VCE=2V, IC=10mA VCE=2V, IC=50mA VCB=10V, f=1MHz IC=5mA, IB=0.5mA IC=200mA, IB=10mA IC=200mA, IB=10mA IC=10A, IE=0 IC=1mA, RBE= IE=10A, IC=0 20 15 5 Ratings min 160 80 0.8 0.98 300 4 15 160 0.95 30 300 1.2 MHz pF mV mV V V V V typ max 560 Unit
200
IC -- VCE
A 0.9mA 0.8mA 0m 1. 0.7mA
600
IC -- VBE
VCE=2V
Collector Current, IC -- mA
0.6mA
Collector Current, IC -- mA
160
500
0.5mA
120
400
0.4mA
80
300
0.3mA 0.2mA
200
40
0.1mA
100
0 0 0.4 0.8 1.2
IB=0
1.6 2.0 ITR10442
0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Collector-to-Emitter Voltage, VCE -- V
1000 7 5
Base-to-Emitter Voltage, VBE -- V
2
Ta=7 5 C 25C --25 C
ITR10443
hFE -- IC
VCE=2V Gain-Bandwidth Product, f T -- MHz
f T -- IC
VCE=2V
1000 7 5
DC Current Gain, hFE
3 2
Ta=75C 25C --25C
3 2
100 7 5 3 2 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7
100 7 5 5 7 10 2 3 5 7 100 2 3 5
Collector Current, IC -- mA
5 3
ITR10444 5
Collector Current, IC -- mA
ITR10445
Cob -- VCB
f=1MHz
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
VCE(sat) -- IC
3 2 1000 7 5 3 2 100 7 5 3 2
IC / IB=20
Output Capacitance, Cob -- pF
2
10 7 5 3 2
25
5C Ta=7 --25C
5 7 1.0 2 3 5 7 10 2
C
1.0 5 7 1.0 2 3 5 7 10 2 3
10 3 5 7 100 2 3 57
Collector-to-Base Voltage, VCB -- V
ITR10446
Collector Current, IC -- mA
ITR10447
No.7385-2/3
CPH6517
10 7
VBE(sat) -- IC
IC / IB=20
2 1.0 7
ASO
ICP=1A IC=0.5A
100s
Base-to-Emitter Saturation Voltage, VBE(sat) -- V
Collector Current, IC -- A
5
1m
10
5 3 2 0.1 7 5 3 2 0.01 0.1
s
3 2
DC
ms
op
10
er
0m
ati
on
s
Ta = 25 C
1.0 7 5 3 5 7 1.0 2
25C
Ta= --25C
75C
3
5 7 10
2
3
5 7 100
2
3
57
2
3
5
7 1.0
2
3
5
7
10
2
3
Collector Current, IC -- mA
600
ITR10448
PC -- Ta
Collector-to-Emitter Voltage, VCE -- V
IT05367
Collector Dissipation, PC -- mW
500
400 350 300
to
ta
ld
200
ip at io 1u n nit
iss
100
0 0 25 50 75 100 125 150 175 IT05368
Ambient Temperature, Ta -- C
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2003. Specifications and information herein are subject to change without notice.
PS No.7385-3/3

▲Up To Search▲

Price & Availability of ENN7385

	To Download ENN7385 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .